Home > AccuLite Barrels >

4.5" CHARGER LR NF TH w/Cap Black Matte
4.5" CHARGER LR NF TH w/Cap Black Matte


 
  $114.00

Stock Status:In Stock
Product Code: 4.5TNF-BM

Description Technical Specs
 
LR (long rifle) NF (no flutes), TH (threaded muzzle-end w/protective cap) Solid anodize .920 Barrel

May we also suggest...
Customize the Ruger 10/22 Manual 2nd Edition PA Parts Accessories Colored Kits MZB1 - 2.5"L x 1 Tapered to .920D - Black Matte - shims incl Performance Kit-2 for LR caliber
Sale Price: $29.95

Add
Sale Price: $139.45

Add
Sale Price: $54.40

Add
  $110.00

Add
Customize the Ruger 10/22 Manual 2nd Edition PA Parts Accessories Colored Kits MZB1 - 2.5"L x 1 Tapered to .920D - Black Matte - shims incl Performance Kit-2 for LR caliber
Volquartsen Target Hammer MZB2 - 2.5"L x 1 Tapered to .920D - Black Matte - shims incl Performance Kit-1 for LR caliber PA Extended Fluted Charging Handle
  $39.00

Add
Sale Price: $30.00

Add
  $51.50

Add
Sale Price: $29.50

Add
Volquartsen Target Hammer MZB2 - 2.5"L x 1 Tapered to .920D - Black Matte - shims incl Performance Kit-1 for LR caliber PA Extended Fluted Charging Handle
PA Reversible Picatinny 1/2" High Scope Rail MZB3 - 2.5"L x .920D - Black Matte - shims incl PA Replacement Trigger PA Extended Magazine Release
Sale Price: $21.95

Add
Sale Price: $30.00

Add
Sale Price: $18.95

Add
Sale Price: $21.50

Add
PA Reversible Picatinny 1/2" High Scope Rail MZB3 - 2.5"L x .920D - Black Matte - shims incl PA Replacement Trigger PA Extended Magazine Release

Average Customer Review: 5 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
 
Exactly what I was looking for July 6, 2019
Reviewer: matthew Bennett from williamston, NC United States  
This barrel was exactly what I was looking for on my charger build at first I opened the package and looked at it I was about to wrap it back up and send it back because it wasnt threaded, I gave it a twist and the thread protector unscrewed. The tolerances are so exact the seam was invisible with it on. I use it with my suppressor. The measurement of 4.5 inches is total, including the part that goes inside the reciever so if you are not using a suppressor it may be too short for your plans. The 1/2x28 threads come right to the end of my aluminum chaise.
Accuracy is far better than I expected for the length. Im sure it exceeds my shooting limitations for accuracy.
I will likely purchase another for my next build.

Was this review helpful to you?