Free Shipping on selected Barrels and Parts
Barrel Length: Only 18.5” & 20” barrels lengths available. Rifle liner runs the full length in barrels
without porting. With porting, rifle liner ends ¾” from the muzzle end in
Standard Features: 8 flats per
barrel. Ported octagon barrels have
2-forward blow holes per flat.
Diameter: .920 point-to-point on flats.
Fits standard bull barrel stocks.
Shank Size: .001 Oversized (may require minor hand fitting)
Chamber: .22 LR Bentz Chamber - can use standard or match grade ammunition.
Hyper-velocity ammo, such as CCI Stingers are not recommended.
Liner: 4140 Steel - Button rifled
.050 Thickness on LR & WMR liner, 6
.065 Thickness on .17HMR liner, 6 groove
Rate of Twist: 1:16 - 22LR and WMR
1:9 - 22LR Sub-Sonic (40, 50, 60 grain
ammo / accuracy range 25-50 yds.)
1:10 - .17 HMR
Caliber: .22 Long Rifle
.22 WMR Magnum and .17HMR available on a
custom order basis. Email a Contact Form
Approximately 1 oz. per inch per length of the barrel
Anodizing: This is an electrochemical process that chemically
infuses the color into the aluminum and will not chip, peel or scratch.
Back to top